-
苏州奇辑化工有限公司
主营：塑料生产厂家,塑胶厂家价格,工程塑料报价,通用塑料厂家,三菱化学Durabio价格,免喷涂塑料哪家好
苏州奇辑化工有限公司
主营：塑料生产厂家,塑胶厂家价格,工程塑料报价,通用塑料厂家,三菱化学Durabio价格,免喷涂塑料哪家好
10
Sabic LEXAN HF1130 UV-stabilized. Good clarity, heat resistance, property retention and dimensional stability.
HF1130紫外线稳定，清晰度好,耐热性,财产保留和尺寸稳定性。
物性表
Property
TYPICAL PROPERTIES (1)
MECHANICAL
Value
Unit
Standard
Tensile Stress, yld, Type I, 50 mm/min
630
kgf/cm2
ASTM D 638
Tensile Stress, brk, Type I, 50 mm/min
660
kgf/cm2
ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min
110
%
ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span
940
kgf/cm2
ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span
23500
kgf/cm2
ASTM D 790
IMPACT
Value
Unit
Standard
Izod Impact, notched, 23°C
65
cm-kgf/cm
ASTM D 256
Tensile Impact, Type S
385
cm-kgf/cm2
ASTM D 1822
Instrumented Impact Energy @ peak, 23°C
553
cm-kgf
ASTM D 3763
THERMAL
Value
Unit
Standard
HDT, 1.82 MPa, 6.4 mm, unannealed
126
°C
ASTM D 648
Relative Temp Index, Elec
130
°C
UL 746B
Relative Temp Index, Mech w/impact
130
°C
UL 746B
Relative Temp Index, Mech w/o impact
130
°C
UL 746B
PHYSICAL
Value
Unit
Standard
Specific Gravity
1.2
-
ASTM D 792
Mold Shrinkage, flow, 3.2 mm (5)
0.5 - 0.7
%
SABIC Method
Melt Flow Rate, 300°C/1.2 kgf
25
g/10 min
ASTM D 1238
OPTICAL
Value
Unit
Standard
Light Transmission, 2.54 mm
88
%
ASTM D 1003
Haze, 2.54 mm
1
%
ASTM D 1003
FLAME CHARACTERISTICS
Value
Unit
Standard
UL Recognized, 94V-2 Flame Class Rating (3)
1.2
mm
UL 94
Source GMD, last updated:2000/01/04
Processing
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 120 | °C |
| Drying Time | 3 - 4 | hrs |
| Drying Time (Cumulative) | 48 | hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 270 - 295 | °C |
| Nozzle Temperature | 265 - 290 | °C |
| Front - Zone 3 Temperature | 270 - 295 | °C |
| Middle - Zone 2 Temperature | 260 - 280 | °C |
| Rear - Zone 1 Temperature | 250 - 270 | °C |
| Mold Temperature | 70 - 95 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Screw Speed | 40 - 70 | rpm |
| Shot to Cylinder Size | 40 - 60 | % |
| Vent Depth | 0.025 - 0.076 |
mm |