-
苏州奇辑化工有限公司
主营：塑料生产厂家,塑胶厂家价格,工程塑料报价,通用塑料厂家,三菱化学Durabio价格,免喷涂塑料哪家好
苏州奇辑化工有限公司
主营：塑料生产厂家,塑胶厂家价格,工程塑料报价,通用塑料厂家,三菱化学Durabio价格,免喷涂塑料哪家好
9
Flame retardant ABS. Excellent indoor UV properties. Excellent moldability. UL94 V-0/5VA rated.ing.
阻燃，抗紫外线，良好的的可塑性
CYCOLAC FR15U物性表
Property
TYPICAL PROPERTIES (1)
MECHANICAL
Value
Unit
Standard
Tensile Stress, yld, Type I, 5 mm/min
37
MPa
ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min
30
MPa
ASTM D 638
Tensile Strain, yld, Type I, 5 mm/min
2.4
%
ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min
17
%
ASTM D 638
Tensile Modulus, 5 mm/min
2060
MPa
ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span
67
MPa
ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span
2340
MPa
ASTM D 790
Tensile Stress, yield, 50 mm/min
41
MPa
ISO 527
Tensile Strain, break, 50 mm/min
21.9
%
ISO 527
Tensile Modulus, 1 mm/min
2210
MPa
ISO 527
Flexural Stress, yield, 2 mm/min
63
MPa
ISO 178
Flexural Modulus, 2 mm/min
2260
MPa
ISO 178
IMPACT
Value
Unit
Standard
Izod Impact, notched, 23°C
213
J/m
ASTM D 256
Instrumented Impact Total Energy, 23°C
28
J
ASTM D 3763
Izod Impact, notched 80*10*4 +23°C
12
kJ/m2
ISO 180/1A
THERMAL
Value
Unit
Standard
Vicat Softening Temp, Rate B/50
93
°C
ASTM D 1525
HDT, 0.45 MPa, 3.2 mm, unannealed
86
°C
ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed
75
°C
ASTM D 648
CTE, -40°C to 40°C, flow
9.E-05
1/°C
ASTM E 831
CTE, -40°C to 40°C, xflow
9.18E-05
1/°C
ASTM E 831
Vicat Softening Temp, Rate B/50
92
°C
ISO 306
Relative Temp Index, Elec
60
°C
UL 746B
Relative Temp Index, Mech w/impact
60
°C
UL 746B
Relative Temp Index, Mech w/o impact
60
°C
UL 746B
PHYSICAL
Value
Unit
Standard
Specific Gravity
1.19
-
ASTM D 792
Mold Shrinkage, flow, 3.2 mm (5)
0.5 - 0.7
%
SABIC Method
Melt Flow Rate, 230°C/3.8 kgf
3.3
g/10 min
ASTM D 1238
Melt Viscosity, 200°C, 1000 sec-1
3200
poise
ASTM D 3825
Density
1.19
g/cm3
ISO 1183
Melt Flow Rate, 220°C/5.0 kg
7
g/10 min
ISO 1133
Melt Volume Rate, MVR at 220°C/10.0 kg
40
cm3/10 min
ISO 1133
ELECTRICAL
Value
Unit
Standard
Arc Resistance, Tungsten {PLC}
7
PLC Code
ASTM D 495
Hot Wire Ignition {PLC)
2
PLC Code
UL 746A
High Voltage Arc Track Rate {PLC}
4
PLC Code
UL 746A
High Ampere Arc Ign, surface {PLC}
4
PLC Code
UL 746A
Comparative Tracking Index (UL) {PLC}
1
PLC Code
UL 746A
Volume Resistivity
>1.E+14
Ohm-cm
IEC 60093
Dielectric Strength, in oil, 3.2 mm
20
kV/mm
IEC 60243-1
FLAME CHARACTERISTICS
Value
Unit
Standard
UL Recognized, 94V-0 Flame Class Rating (3)
1.49
mm
UL 94
UL Recognized, 94-5VA Rating (3)
2.79
mm
UL 94
Source GMD, last updated:2002/05/09
Processing
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 80 - 90 | °C |
| Drying Time | 2 - 4 | hrs |
| Drying Time (Cumulative) | 8 | hrs |
| Maximum Moisture Content | 0.1 | % |
| Melt Temperature | 205 - 230 | °C |
| Nozzle Temperature | 205 - 230 | °C |
| Front - Zone 3 Temperature | 205 - 220 | °C |
| Middle - Zone 2 Temperature | 200 - 210 | °C |
| Rear - Zone 1 Temperature | 170 - 180 | °C |
| Mold Temperature | 50 - 70 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Screw Speed | 30 - 60 | rpm |
| Shot to Cylinder Size | 50 - 70 | % |
| Vent Depth | 0.038 - 0.051 | mm |